519.325.0804 4 Iroquois Road, Unit #5, Leamington, Ontario N8H 3V7
logo
logo
  • Col_1
    • Capabilities
      • Batch Production
      • Custom Machining
      • OEM Parts Manufacturing
      • Engineering & Cad Design
      • Welding
      • Fabrication
      • Maintenance
  • Col_2
    • Home
    • Projects
    • Process
    • Careers
    • About
    • Blog
    • Contact
519.325.0804 4 Iroquois Road, Unit #5, Leamington, Ontario N8H 3V7

Capabilities

Batch Production

  • Batch Production
  • Custom Machining
  • OEM Parts Manufacturing
  • Engineering & Cad Design
  • Welding
  • Fabrication
  • Maintenance

CNC Batch Production: The Same Part, the Same Way, Every Run

Your first run looked great. By the third run, the parts drift out of tolerance and nobody tells you until one fails on the line. Custom Concepts Machining provides CNC batch production for OEMs and machine builders who need 50 to 500+ identical parts, order after order. We set up your part once, save the program and setup, and run every repeat order the same way.

Blue Kurt vises on a fixture plate inside a CNC machining centre set up for batch production

Consistency Across Every Batch

Batch production is about repeatability, not just speed. Once your part is proven, it follows the same program, the same fixtures and the same quality checks on every run. That keeps parts uniform from the first piece to the last, so your assembly team never has to make last-minute adjustments.

Here is how we keep batches consistent:

  • First article inspection. We machine and check the first part against your drawing before running the batch.
  • Saved programs and setups. Mastercam toolpaths and setup notes are kept on file for repeat orders.
  • In-house inspection. We check parts with our own inspection tooling, holding half a thou to a thou (0.0005″ to 0.001″) where the drawing calls for it.
  • Unattended turning. Our multitasking lathe runs through a shift with the bar feeder loaded, which keeps long runs on schedule.
Batch production run of brass slotted blocks, black anodized blocks and aluminum plates
Batch of CNC turned steel spool pulleys with brass pins from a repeat production order
Aluminum fixture and bridge assemblies machined in a batch at our Leamington machine shop

See What we can do Start Your Project Our Work in Action

Batch Sizes That Make Sense for Your Build

Many shops want to run 500 parts when you need 75. Others quote 75 but add setup costs that kill the business case. We are set up for the middle ground. Our batch production runs typically span 50 to 500+ units, with repeat runs monthly, quarterly or when you call. For one-off parts and short emergency runs, see our custom machining service.

Stop Managing Multiple Suppliers

One shop does turning, another does milling, and a third does welding. Coordinating that for a single part eats your week. We handle CNC milling, CNC turning, welding, light fabrication and SolidWorks design in one shop. The shop that made your prototype also runs your production batch, so nobody has to relearn the part when you scale up.

Solve Supply Chain Headaches

Overseas suppliers quote long lead times, and freight adds weeks and risk. CNC batch production from a North American shop gives you:

  • Reliable lead times you can plan a build around
  • Consistent quality that cuts scrap and rework
  • Clear communication on order status, without you having to ask
  • Production that scales with your demand

What We Run in Batches

Recent batch work includes aluminum fixtures, steel shafts, UHMW plastic parts, timing pulleys and components for filling lines. We also ran clamp blocks for an automated assembly cell and rocker jogger blocks for a printing machine. One recent 50-part run shipped on schedule and matched the drawing from the first part to the last.

We machine steel, aluminum, stainless steel, alloy steels, titanium and most engineering plastics.

From Prototype to Production

Start with a drawing, a SolidWorks file or a worn part. We build a prototype, and if you need to check fit first, we can print a trial piece in plastic or nylon composite. Once you approve the first article, we move into production and keep the setup ready for your next order. Our OEM parts manufacturing page explains this process for machine builders.

Frequently Asked Questions

What quantities do you run for CNC batch production?

Our batch runs typically span 50 to 500+ identical parts. Smaller quantities run through our custom machining service.

Will my repeat order match the first one?

Yes. We save the program, setup and inspection notes from your first run and use them on every repeat order.

Do you ship batch orders outside Ontario?

Yes. We ship batch production orders across Canada and the United States.

What do you need to quote a batch?

A drawing or 3D model, the material, the quantity per run and how often you expect to reorder.

Start Your CNC Batch Production Run

If you need a CNC batch production partner who delivers the same part on time every run, send your drawing through the form on this page or call Custom Concepts Machining at (519) 325-0804. Our shop is at 4 Iroquois Road, Unit #5, Leamington, Ontario N8H 3V7.

Our Work

  • White UHMW plastic trays with bored hole patterns, machined in a production batch
  • Five CNC machined aluminum timing pulleys with toothed profiles and bored centres
  • Rows of polished steel blocks with counterbored holes from a batch production run
  • Large batch of aluminum hinge plates laid out on the floor of a CNC machine shop
  • Batch of semicircular steel half rings, CNC machined to the same profile
  • Black anodized aluminum half ring segment with countersunk mounting holes
  • Assorted CNC machined aluminum and steel blocks and pins for an automated machine
  • Automated fill line components: white UHMW guide, steel nozzles and ground steel shafts
  • Automated machinery components: aluminum plates with pockets and hole patterns plus brass bars
  • Automated machinery components: black machined comb fingers and aluminum mounting plates
  • Ten CNC turned stainless steel filling valve actuator stems with collars
  • Stainless steel filling valve nozzles and white plastic centering stars for a bottling line
  • Stack of heat treated steel guide stops with drilled holes, made in a batch
  • Black machined comb style finger guides stacked on a shop bench
  • Close up of a large aluminum block with a bored pocket and CNC milled surface finish
  • Dozens of labelled aluminum and steel fixture plates from a precision CNC machining order
  • Aluminum plates with tapped hole patterns laid out in a grid on a wood bench
  • Batch of aluminum blocks, plates and brackets from a CNC machine shop in Leamington, Ontario
  • Aluminum blocks and brackets from one production order, laid out for inspection
  • Stainless steel cone nozzles and white plastic centering stars for an automated filling line
  • Eight long threaded steel tie bars for a molding press stuffer cylinder
  • Close up of threaded ends and wrench flats on molding press tie bars
  • Molding press stuffer cylinder tie bars with CNC turned threads
  • Row of turned steel prototype bolts for installing cylinder ends
  • Turned steel shafts with large collars and threaded ends, made in a production batch
  • Turned steel tubes with milled flats and bored ends on a shop bench
  • UHMW guide rail, steel nozzles and ground shafts for an automated fill line
  • Batch of 30 black oxide steel cylinder end tools for prototype bolt installation
logo
4 Iroquois Road, Unit #5, Leamington, Ontario N8H 3V7
519.325.0804
Copyright © Custom Concepts Canada | Website Design By Cowlick Studios
Please enable JavaScript in your browser to complete this form.
Drag & Drop Files, Choose Files to Upload You can upload up to 5 files.
PDF, image, DXF, DWG, STEP, IGES, SolidWorks, STL or ZIP files, up to 10 MB each. If a file is larger than 10 MB, email it to jeff@customconceptscanada.ca.
Loading